Bathroom Vanity Cabinet Calculator
Enter your vanity dimensions to get the panel cut list, sheet count and hardware for a DIY bathroom cabinet.
Result
- Carcass (sides + top/bottom)
- 1.1 m²
- Back panel
- 0.33 m²
- Total board (15% waste)
- 2.36 m²
- Sheets needed (210×280 cm)
- 1
- Hinges
- 4
- Drawer slides (pairs)
- 0
- Handles
- 2
- Confirmat / cam fittings
- ~8
Estimates only; actual needs depend on product pack sizes and manufacturer coverage.
Cut list for the panel shop
| Part | Name | Qty | Size (cm) | Edge banding |
|---|---|---|---|---|
| A/B | Side panels | 2 | 55 × 48 | 1 long edge |
| C/D | Bottom & top panels | 2 | 56.4 × 48 | 1 long edge |
| E | Back panel (8 mm) | 1 | 59.6 × 54.6 | None |
| F | Shelves | 1 | 56.4 × 46 | 1 long edge |
| G | Doors | 2 | 54.4 × 29.4 | 4 edges |
Assembly steps
- Place the bottom panel (C) between the sides (A, B) at 90° and fix with 2 × 4×50 mm screws per joint, 5 cm from each edge.
- Fit the top panel (D) the same way.
- Lay the carcass face down and measure both diagonals; push until they are equal so doors close properly.
- Nail or screw the back panel (E) every 15 cm with 3.5×18 mm screws.
- Install shelves (F) on pins or with 4×50 mm screws through the sides.
- Mount 35 mm cup hinges on the doors (G) with 3.5×16 mm screws; hinge plates sit 37 mm from the front edge.
Related calculators
Kitchen Cabinet Calculator
Free kitchen cabinet calculator: enter width, height and depth to get a panel cut list, number of 18 mm sheets, edge banding, hinges and assembly steps.
Wardrobe Calculator
Free wardrobe calculator: get a cut list, board sheets, edge banding, hinges, drawer slides and handles for your DIY closet.
Tile Calculator
Free tile calculator: enter room size and tile size to get boxes of tile including waste, adhesive bags and grout needed.
Paint Calculator
Free paint calculator: enter room size, doors and windows to get liters/gallons of paint, primer and masking tape for walls and ceiling.
Frequently Asked Questions
What board is best for bathroom cabinets?
Moisture-resistant (MR) MDF or melamine-faced particle board with all edges sealed is recommended for bathrooms.
What is a standard vanity size?
Common vanities are 60–120 cm wide, 45–55 cm deep and around 55–85 cm high depending on wall or floor mounting.